ENGLISH
Backstage®
Guitar Amplifier
Thank you for selecting the Backstage guitar amplifier. The Backstage‚ one of the hottest little guitar amplifiers around‚ offers a great big sound in a small
Before you begin to play through your amplifier, it is very important to ensure the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular features next to their number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
FEATURES
·
·Overdrive control with on/off switch
·Tape/CD input connection
·High and Low equalization
SPECIFICATIONS
Power amplifier section | Clean channel: |
Rated power: | Nominal Input Level: |
10 Watts RMS into 8 Ohms @ 10% THD‚ | Minimum Input Level: |
1 kHz‚ 120 VAC line | Maximum Input Level: |
System hum and noise @ nominal input level:
(Clean channel‚ 20
Power consumption:
Domestic: 26 Watts‚ 60 Hz‚ 120 VAC
Export: 26 Watts‚ 50/60 Hz‚
Preamp section
The following specifications are measured @ 1 kHz with the controls preset as follows:
Overdrive channel:
Nominal Input Level:
Minimum Input Level:
Tape/CD input:
Impedance: High Z‚ 22 k Ohms
Nominal Input Level:
Headphone output:
Nominal Output Level: 25 mV into 4 Ohms (Disconnects internal speaker when used)
Dimensions (H x W x D):
11.00" x 11.20" x 6.75"
(280 mm x 283 mm x 170 mm)
Weight
11 lbs. (5 kg)
7
