Peavey CPX 900, CPX 2600 specifications Features, Description, Power Amplifiers S E R I E S

CPX900 - CPX2600

Power Amplifiers S E R I E S

(CPX2600 model shown)

Power Specifications 8Ω stereo 4Ω stereo 2Ω stereo 8Ω bridged 4Ωbridged

1kHz, 0.1% THD+N (2Ω stereo and 4Ω bridged have 1% THD)

CPX 2600		500w	750w	1100w	1550w	2200w
CPX 1500		300w	500w	750w	1000w	1500w
CPX	900	180w	300w	450w	600w	900w

Features

•GCL Gain Comparator Limiting system with rear panel defeat switch

•Built-in Crossover

150 Hz, -24 dB per octave Linkwitz-Riley filter, tuned for subs Individual in/out switches for Channels A and B

1/4” daisy chain outputs

• Built-in low cut filter

-18 dB per octave at 80 Hz

Individual in/out switches for Channels A and B

•Input connectors - Barrier strip, Female XLR 1/4” TRS Pin 2 hot

•Outputs connectors

SpeakonsTM for Ch A and B and Bridged mono

Binding posts for Bridge mode

•Mode selector switch for stereo and bridged-mono operation

•Two speed DC Fan

Description

The CPX is an affordable line of amplifiers geared toward the MI and DJ markets. A tradition of great sound quality, flexibili- ty and reliability is carried over into the Crest Performance series. Industry standard connectors and features make the CPX a great backbone for mobile sound systems, project stu- dios and many other applications. Musicians will also find CPX as the power amp of choice.

Power points: Crest CPX amps are available in three models, CPX900, CPX1500 and CPX2600. Power capabilities range from 180 Watts to 2200 Watts. CPX amps will drive loads that range from 8 Ohms stereo to 2 Ohms stereo, or 4 Ohms bridged.

Feature set: With a comprehensive set of features including built-in signal limiting, low pass filters and low frequency crossovers with direct outputs, the CPX line addresses sever- al applications and serves as a low-cost solution for most power amplification needs.

Protection Circuitry

GCL (Gain Comparator Limiting): Monitors input/output gain and reduces signal when distortion or excessive high current conditions occur. Protects loudspeakers from dangerous transients and unex- pected level changes. Transparent in operation, yet very effective for its designed purpose.

Thermal: Amp monitors internal heat sink temperature and tem- porarily shuts down during extreme thermal conditions.

DC Triac Crowbar: Prevents amplifier from putting out or receiving dangerous DC over the speaker lines.

Turn On/Off Muting: Outputs are muted during turn on and turn off to prevent audible pop through speakers.