DJS’” 1800
Portable
DJ System
SPECIFICATIONS
Enclosure:
DJSTM 1800 System
Frequency Response:
Low Frequency Limit (-3 dB point):
40 Hz
Useable Low Frequency Limit (-10 dB point):
35 Hz
Power Handling:
350 watts continuous (37.4 volts RMS)
600 watts program
Sound Pressure Level 1 Watt at 1
Meter Swept Sine Input in Anechoic
Environment:
98 dB
Maximum Sound Pressure Level:
121 dB
Radiation Angle Measured at -6 dB Point of Polar Response:
| |
Horizontal: | 96” _+I 5” |
Vertical: | 92” +30° |
1.6 |
|
Horizontal: | 73” +I 5” |
Vertical: | 74” *20° |
5 |
|
Horizontal: | 97” +5” |
Vertical: | 46” +_5” |
Directivity Factor, (Mean):
6.87; +6.1,
Directivity Index Di (Mean):
8.37 dB; +6 dB,
Transducer Complement:
DJS 1800 Sub:
18” 4 ohm
DJS 1800:
Peavey 22XTTM titanium compression driver loaded onto a
Box Tuning Frequency (Fbox):
DJS 1800 Sub: 55 Hz
DJS 1800 Closed Box (fc): 80 Hz
Crossover Frequency:
DJS 1800 Sub: 200 Hz
DJS 1800: 1200 Hz
Crossover Type:
Internal Passive
Electrical Crossover Slope:
Subwoofer: 12 dB/octave low pass (6 dB/ octave high output)
Satellite: 12 dB/octave for satellite internal hiqh and low pass
Impedance (Nominal):
4 ohms
Impedance (Minimum):
Input Connections:
DJS 1800 Sub: One l/4” female full range input and one l/4” female high pass output
DJS 1800: Two l/4” female full range inputs in parallel, one l/4” female biamp low input and one l/4” female biamp high input
Enclosure Materials and Finish:
3/4” MDF cabinet, braced internally, covered with durable black carpet, and reinforced with high impact polymer corners
Mounting:
DJS 1800 Sub: Internal mounting block, guide pole, and stand adaptor plate DJS 1800:
Dimensions:
DJS 1800 Sub:
22.5” W x 30.5” H x 25.75” D
(57.2 cm W x 77.5 cm H x 65.4 cm D)
