Blend

The blend control (5) is offered for a wider variety of sounds than available from conventional pickup selector switches. It may be varied from the neck pickup (full clockwise - CW) or any blend in-between.

Output Jack

The output jack is a genuine Switchcraft®* 1/4" phone jack which accepts standard guitar cables. (We recom- mend high-quality Peavey shielded instrument cables).

* Switchcraft is a registered trademark of Switchcraft, Inc.

Adjustments

Your instrument has been carefully adjusted at the Peavey factory for accurate intonation and playing ease. However, your playing style and requirements may necessitate additional adjustments. These should be made by your authorized Peavey dealer, but with a little care and by closely adhering to the following instructions, you may attempt these adjustments yourself.

Please read the instructions thoroughly before attempting any adjustments.

Torsion Rod

The neck is equipped with an a two way steel torsion rod neck, should neck adjustments be desired. While the neck should need few adjust- ments, neck relief (string clearance over fingerboard) can be tailored to your particular playing style or string gauge. Adjustments can be made by inserting the supplied Allen wrench into the adjustment

6

Page 6
Image 6
Peavey Guitar manual Adjustments, Blend, Output Jack, Torsion Rod