SPECIFICATIONS | Studio Pro™ M2 |
|
|
The Studio Pro M2 can be used as a main microphone for orchestra recordings, as a spot mic for single instruments, and as a vocal microphone for all types of music and speech.
The large
An additional switch is added for use in high SPL applications. This 10 dB attenuation switch enables the microphone to handle sound pressure levels up to 140 dB.
Operation
Position the M2 so that the side with the LED and Peavey logo faces the source. The M2 is equipped with three switches, one for mic pickup patterns, one for high SPL applications and the other for reduction in proximity effect and to reduce low frequencies that can make an instrument sound dull or muddy. Determine which of these conditions you’re needing to mic and make the appropriate selection. Note: It is not recommended to change a switch selection without first reducing the mixer gain. The M2 is equipped with a swivel mount to secure the microphone to a floor or boom stand. The internal shock mount provides good isolation but for greater reduction of noise from external vibrations use the optional elastic shock mount which can be purchased from your local authorized Peavey dealer.
3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi
| 20 |
|
| 10 |
|
dB | 0 |
|
|
| |
|
| |
|
| |
|
|
|
| 20 |
Frequency Response: |
| 0o |
| 30o | |
| ||
Cardioid |
|
|
| 60o | |
Omni | ||
Low Cut |
|
|
|
|
|
| 90o |
6dB/div.
50 | 100 | 200 | 500 | 1k | 2k | 5k | 10k | 20k | Polar Response |
|
|
| Frequency (Hz) |
|
|
|
|
2