Specifications
Page 21Peavey Electronics Corp
Specifications
MECHANICAL
PERFORMANCE
Dimensions (H x W x D)
Weight
Mounting
Connections
1.75" x 19" x 9.38" (45 mm x 483 mm x 238 mm)
7.5 lbs., 3.4 kg
Single EIA Space Rack Mount
Removable “Euro” Connectors for single Channel audio inputs, outputs and bus
link. IEC receptacle for AC power.
(Test Conditions: 120 Vrms, 60 Hz line voltage maintained throughout testing. Reference: 0 dBu = 0.775 Vrms.)
INPUT SPECIFICATIONS
Equivalent Input Noise:
-128 dBu (Rs = 150 Ohms), typical
Preamp Gain Range:
10 dB -65 dB (MIC inputs)
-13 dB -44 dB (LINE inputs)
Input Impedance:
2K Ohms (MIC inputs)
>10K Ohms (LINE inputs)
>10K Ohms (INSERT inputs)
Priority (Channels 1 and 2):
0 dB to 9 dB
Phantom Power:
+48 Volts
Input Sensitivity:
MIC Inputs -61 dBu
LINE Inputs -40 dBu
INSERT Inputs +4 dBu
Maximum Input Level:
MIC Inputs +12 dBu
LINE Inputs +30 dBu
INSERT Inputs +21 dBu
Common Mode Rejection:
>70 dB 20 Hz - 20 kHz
OUTPUT SPECIFICATIONS
Frequency Response:
75 Hz (-3 dB) to 20 kHz (-1 dB)
(at +4 dBu; ref: 1 kHz; 75 Hz HPF)
THD:
<0.1% at +4 dBu
(22 Hz - 22 kHz BPF)
Signal/Noise:
(Rs = 150 ohms; 30 kHz LPF)
>85 dB (all controls fully CCW)
Output Impedance:
<200 Ohms
Nominal Output Level:
LINE Level Output +4 dBu
MIC Level Output -26 dBu
INSERT Outputs+4 dBu
Maximum Output Level:
LINE Level Output +21 dBu (Hi-Z load) +18 dBu (600 load)
MIC Level Output -9 dBu (Hi-Z load) -12 dBu (600 load)
INSERT Outputs +21 dBu (Hi-Z load)
GENERAL SPECIFICATIONS
Channel Clip LED:
Red LED lights 2 dB before clipping
Also lights to indicate mute on Channel 1 and 2 inputs
Output Level Indicators:
Red LED lights 2 dB before clipping.
Yellow LED lights at +4 dBu.
Green LED lights at -16 dBu.
Power Requirements:
120 V RMS, 60 Hz Domestic
230 V RMS, 50/60 Hz Export
15 watts nominal