Peavey not available manual Rated Power, Frequency Response, System Hum and Noise

Ecoustic® E208 Acoustic Guitar Amplifier Specifications

Power Amp Section:

Rated Power:

20 W(rms) into 4 ohm load

(< 3% THD, 1 kHz, 120 VAC line)

Frequency Response:

Amplifier (including headphone amplifier): 20 Hz - 20 kHz

Speaker:

80 Hz - 10 kHz

Headphone output:

Stereo headphone jack with mono output

Rated output: 60 mW into 4 ohm headphones (minimum load) @ < 1% THD

(Switching jack disconnects speakers while in use)

System Hum and Noise

-43 dBu (both channels operating) 20 watt RMS into 4 ohms

Preamp Section:

The following specs are measured @ 1 kHz with the EQ flat @ 0 dB. Nominal values are with levels @ 5, minium values are with levels @ 10.

Channel 1 Instrument Input:

1/4 inch high Z-input

Input impedance = 1 MOhm Nominal input level = 180mVrms Minimum input level = 20mVrms Maximum input level = 2.0mVrms

Channel 2 Instrument/Microphone Input:

Microphone:

Balanced XLR input

Input impedance = 1 kOhm

Nominal input level: -4.72 dBu, 450mVrms

Minimum input level: -29.8 dBu, 25mVrms

Maximum input level: +8.24 dBu, 2.0mVrms

Instrument:

1/4 inch high Z-input

Input impedance = 1 MOhm

Nominal input level: -12.7 dBu, 180mVrms

Minimum input level: -31.8 dBu, 20mVrms

Maximum input level: +8.24 dBu, 2.0mVrms

Dimensions (H x W x D):

15.00"(381 mm) x8.750" (222.25 mm) x 19.625" (498.475 mm)

Weight:

25 lbs. 11.33 kg)

NOTE: Specifications subject to change without notice.

19