Peavey PR15P

SPECIFICATIONS

Enclosure: Peavey PR 15P (domestic)

Frequency Response: 47 Hz to 20 kHz

Low Frequency Limit (-3 dB point): 47 Hz

Useable Low Frequency Limit (-10 dB

point):

36 Hz

Internal Power Amplifiers (@120 VAC line):

Woofer - 200 Watts peak dynamic power

150 Watts @ less than 0.1% distortion Tweeter - 70 Watts peak dynamic power

50 Watts @ less than 0.1% distortion.

Nominal Sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB

Maximum Sound Pressure Level: 120 dB music peak

Nominal Radiation Angles: 90˚ horizontal by 40˚ vertical

Transducer Complement:

12" heavy duty woofer, and RX14 1.4" titanium diaphragm compression driver tweeter

Box Tuning Frequency (Fbox): 55 Hz

Electroacoustic Crossover Frequency: 2000 Hz

Crossover Type:

Internal Electronic two-way crossover with CD horn EQ, level matching, bass boost and subsonic filtering.

Crossover Slopes:

18 dB/octave (third order) low pass,

18 dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer, so there is no need for phase alignment or time delay of the signals.

Electronic Input Impedance (Nominal): 10 k Ohms unbalanced, 20 k Ohms balanced line level, 2.4 k Ohms balanced mic level.

Input Connections:

One combo female XLR/ 1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity. Also has two 1/4" phone jack line level unbalanced inputs with a concentric pair of level controls.

Enclosure Materials and Finish: Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured finish. Molded material is dark gray.

Mounting:

Subwoofer pole-mounting via molded- in mount, flying via Versamount70 and four rubber feet for floor use.

Dimensions:

28.56" (72.5 cm) tall by 21.31"

(54.1 cm) wide {11.50"/29.2 cm in rear} by 17.00" (43.2 cm ) deep

Optional Accessories: Impulse® 200 Floor Monitor Kit (FG# 00370480)

Net Weight: 52 lbs.

Additional Remarks:

Also available as a passively crossed- over unit, the Peavey PR 15

ELECTRONICS AND AMPLIFIER

SPECIFICATIONS:

Electronic Input Impedance (Nominal): Primary balanced input: 20 k ohms line level sensitivity selected, 2.4 k ohms mic level sensitivity selected, 10 k ohms unbalanced 1/4".

Mic Switch Sensitivity Increase: 30 dB

Infrasonic filter protection: 36 dB/octave roll-off

Nominal Amplifier Frequency Response: +0, -1 dB from 10 Hz to 30 kHz

Hum and Noise:

Greater than 90 dB below rated power

DDT Dynamic Range:

Greater than 14 dB

THD and IM:

Typically less than 0.1 %

Damping Factor:

Greater than 100 @ 1000 Hz, 8 Ohms

Power requirements of Peavey PR12P System (domestic):

Nominal 100 Watts, 120 VAC, 60 Hz

12

Page 12
Image 12
Peavey PR 15P manual Peavey PR15P

PR 15P specifications

The Peavey PR 15P is a popular powered loudspeaker designed for musicians, DJs, and sound engineers seeking a versatile and robust solution for live sound applications. With its impressive audio performance and durable construction, the PR 15P stands out as a reliable choice for both professional and amateur use.

One of the key features of the PR 15P is its 15-inch heavy-duty woofer that provides deep, punchy bass response. Coupled with a 1-inch compression driver and a high-frequency horn, the speaker delivers clear and articulate high frequencies, ensuring a balanced sound across the entire frequency range. The combination of these components allows the PR 15P to produce a powerful output of up to 1000 watts peak power, making it suitable for large venues or outdoor events.

The PR 15P is equipped with a built-in class D amplifier, which not only provides efficient power but also contributes to a lightweight design. This amplification technology allows the speaker to deliver exceptional sound quality without the bulkiness often associated with traditional amplifiers. The enclosure is constructed from durable polypropylene, ensuring the speaker can withstand the rigors of transport and frequent use.

In terms of connectivity, the PR 15P offers versatile options that include XLR and 1/4-inch inputs, allowing users to connect a variety of audio sources such as mixers, microphones, or instruments. The presence of a built-in mixer with a 3-channel configuration adds to its functionality, making it an all-in-one solution for smaller setups. Additionally, a simple adjustable EQ allows users to tailor the sound according to their specific environment or preferences.

The design of the Peavey PR 15P also features a lightweight construction and ergonomically placed handles, which facilitate easy transport and setup. The speaker can be used in multiple configurations, including as a main PA speaker, a floor monitor, or even mounted on a standard speaker stand.

Overall, the Peavey PR 15P combines powerful performance, versatility, and portability, making it an ideal choice for a wide range of sound reinforcement applications. Its robust features and technologies ensure that users can achieve professional-grade sound quality, whether in a club, at a concert, or during a corporate event. The PR 15P truly exemplifies Peavey’s commitment to delivering high-quality audio solutions for both performers and audiences alike.