Peavey PVM 38i Architectural Engineering Specifications, Inches Millimeters, jO.80, Blue

The PVM’” 38i also features a refined shock suspensron which provides a very low sensitivity to annoying handling and stand noises.

Feedback and coloration from nearby monitors or the house system are effec- tively controlled by the very uniform car- dioid directional properties.

And the PVM 38i is rugged! With a tough metal handle and brazed steel wire outer grille, this microphone comes ready for the road.

The compact, handsome PVM 38i of- fers all that is needed for top vocal per- formance in any venue.

ARCHITECTURAL

&ENGINEERING SPECIFICATIONS

The microphone shall be a moving co11 dynamic type with a frequency response of 50 Hz to 16,000 Hz. The microphone shall have a cardioid polar characteristic with a rear response that is about 20 dB down. The mrcrophone shall have an output power level of -56.0 dBM where 0 dB = 1 millrwatt per IO microbar and nominal im- pedance rating of 300 ohms.

The microphone shall have a non- reflecting black finish on a solid metal case and a brazed metal screen. The connector shall be a 3-pin XLR equivalent audio type and a swivel adaptor shall be provided to mount on a stand having 5/8” 27 thread. The microphone shall have overall dimen- sions of 5%” in length and 17/8” in diameter. The mlcrophone shall be a Peavey model PVM’” 38i or equivalent.

DIMENSIONS

INCHES

(MILLIMETERS)

I

2

jO.80

59

146 05)

				WIRING DIAGRAM
r	-_---------- ‘-““““-““‘---‘---
I			HUM COMPENSATION COIL				I
I					RED		I
I		I’				I	I
I							I
I
I
I
I
I
I
I
I
I
I
I				BLUE
I
I
I		POSlTlVE (INWARD) PRESSURE ON DIAPHRAGM
I
I		PRODUCES POSITIVE VOLTAGE AT PINIY2
I	_-_