This rating is contingent upon having a minimum of 3 dB of amplifier headroom available.
Harmonic Distortion
Second and third harmonic distortions vs. frequency are plotted in figures 5 and
6 for two power levels, ten percent (10%) of rated input power and either one percent (1%) of rated input power or one Watt, whichever is greater. Distortion is read from the graph as the difference between the fundamental signal (frequency response) and the desired harmonic. As an example, a distortion curve that is down 40 dB from the fundamental is equivalent to 1% distortion.
Architectural and Engineering Specifications
The loudspeaker system shall have an operating bandwidth of 74 Hz to 18 kHz. The nominal output level shall be 96.0 dB when measured at a distance of one meter with an input of one Watt. The nominal impedance shall be 8.0 Ohms. The maximum continuous power handling shall be 250 Watts, maximum program power of 500 Watts and a peak power input of at least 1,000 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 40 degrees in the vertical plane. The outside dimensions shall be 18.75 inches
high by 14.00 inches wide by 13.19 inches deep. The weight shall be 31 pounds. The loudspeaker system shall be an Architectural Acoustics model Quadra 10.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi
4
