Peavey SSE 12 specifications + 2 Year Limited Warranty

Radiation angle measured at -6 dB point of polar response:

500 Hz to 1.6 kHz:

Horiz. 110˚ ± 15˚ Vert. 120˚ ± 30˚

1.6kHz to 5 kHz: Horiz. 75˚ ± 15˚ Vert. 70˚ ± 25˚

5 kHz to 16 kHz: Horiz. 85˚ ± 15˚ Vert. 40˚ ± 10˚

Directivity factor, Q (Mean):

10.27 ± 6.07

Directivity index, Di (Mean):

9.38 dB ± 2.57 dB

Transducer complement:

Low Frequency Section:

Peavey Scorpion® Pro 1200+ 12" woofer with 2.5" (64 mm) voice coil

High Frequency Section:

Peavey 14XT™ titanium diaphragm compression driver on a 90° x 40° constant directivity horn

Box tuning frequency:

Low frequency section: 74 Hz

Harmonic distortion:

1% rated power Second harmonic:

100 Hz:	0.32%
1 kHz:	0.10%
Third harmonic:
100 Hz:	0.40%
1 kHz:	0.22%

10% rated power Second harmonic:

100 Hz:	0.56%
1 kHz:	0.79%
Third harmonic:
100 Hz:	0.79%
1 kHz:	0.25%

Electro-acoustic crossover frequency (internal passive):

2.8 kHz

Impedance (Z):

Full range:
Nominal:	8 Ω
Minimum:	5.1 Ω

Input Connection:

1 four-Pin Neutrik® Speakon® in parallel with one 1-position terminal strip

Enclosure materials and finish

Trapezoidal, dado-joined 13 mm birch enclosure finished with a textured acrylic

polyurethane with a full length metal grille covered and acoustical-grade grille cloth. Available in black, white or natural finishes.

Mounting provisions:

(6)3/8"-16 threaded mounting suspension points (three each top and one each side and back). Use only forged shoulder machinery eye bolt, Mil Spec MIL51937-3. (1) 1/4"-20 threaded mounting point on back bottom for angle adjustments.

(4)1/4"-20 threaded mounting points on bottom to accommodate use of VersaMount™ 70 adjustable mounting bracket.

DO NOT suspend this unit upside down using VersaMount system.

Dimensions (H x W x D):

Front:

24.5" x 17.43" x 13.20"

622 mm x 443 mm x 335 mm Rear:

24.5" x 13.14" x 13.20"

622 mm x 334 mm x 335 mm

Net Weight:

40 lbs. (18.1 kg)

Frequency response

This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the SSE 12 is measured at a distance of 1 meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure 1, the selected drivers in the SSE 12 combine to give a smooth frequency response from 79 Hz to 17 kHz.

Directivity

Beamwidth is derived from the -6 dB points from the polar plots (see figure 3) which are measured in a whole space anechoic environment. Q and Directivity Index are plotted for the on-axis measurement position. These specifications provide a reference to the coverage characteristics of the unit and provide insight into proper placement and installation in the chosen environment. The blending of the components of the SSE 12 exhibit a desirable beamwidth and directivity (figures 3 & 4) suitable for sound reinforcement applications.

Power handling

There are many different approaches to power handling ratings. Peavey rates this loudspeaker system’s power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz

to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today’s high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available.

Harmonic distortion

Second and third harmonic distortions vs. frequency are plotted in figures 5 & 6 for two power levels. Ten percent (10%) of rated input power and either one percent (1%) of rated input power or 1 Watt, whichever is greater. Distortion is read from the graph as the difference between the fundamental signal (frequency response) and the desired harmonic. As an example, a distortion curve that is down

40 dB from the fundamental is equivalent to 1% distortion.

Mounting

Caution: Before attempting to suspend or mount this speaker, consult a certified structural engineer. The speaker may fall due to improper installation, resulting in serious injury and property damage. DO NOT suspend or mount any other product or device from this enclosure. The maximum enclosure angle is 45°. Use only Grade 5 hardware or better. All associated rigging is the responsibility of others.

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 79 Hz to 17 kHz. The nominal output level shall be 98 dB when measured at a distance of 1 meter with an input of 1 Watt. The nominal impedance shall be 8 Ohms. The maximum program power handling shall be 500 Watts with a peak power input of at least 1000 Watts and a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90˚ in the horizontal plane and 40˚ in the vertical plane. The outside dimensions shall be 24.5" high by 17.43" wide by 13.20" deep. The weight shall be 40 lbs. The loudspeaker system shall be a model SSE 12.

3 + 2 YEAR LIMITED WARRANTY

NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi 39301-2898.

2