Peavey Studio Pro M2 specifications

Models: Studio Pro M2

1 6
Download 6 pages 49.92 Kb
Page 2
Image 2

SPECIFICATIONS

Studio ProM2

 

 

The Studio Pro M2 can be used as a main microphone for orchestra recordings, as a spot mic for single instruments, and as a vocal microphone for all types of music and speech.

The large gold-plated diaphragm capsule has a very smooth frequency response for all polar patterns. The microphone can be used very close to a sound source without the sound becoming unnaturally harsh. By means of a switchable high- pass filter, interference through subsonic and low frequencies are reduced remarkably. As such, this switch cuts the low frequency response reducing the proximity effect.

An additional switch is added for use in high SPL applications. This 10 dB attenuation switch enables the microphone to handle sound pressure levels up to 140 dB.

Operation

Position the M2 so that the side with the LED and Peavey logo faces the source. The M2 is equipped with three switches, one for mic pickup patterns, one for high SPL applications and the other for reduction in proximity effect and to reduce low frequencies that can make an instrument sound dull or muddy. Determine which of these conditions you’re needing to mic and make the appropriate selection. Note: It is not recommended to change a switch selection without first reducing the mixer gain. The M2 is equipped with a swivel mount to secure the microphone to a floor or boom stand. The internal shock mount provides good isolation but for greater reduction of noise from external vibrations use the optional elastic shock mount which can be purchased from your local authorized Peavey dealer.

3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi 39301-2898.

 

20

 

 

10

 

dB

0

 

 

 

 

-10

 

 

-20

 

 

 

 

 

20

Frequency Response: On-Axis

 

0o

 

30o

 

-30o

Cardioid On-Axis

 

 

Figure-8 On-Axis

60o

-60o

Omni On-Axis

Low Cut

 

 

-10 dB

 

 

 

90o

-90o

6dB/div.

50

100

200

500

1k

2k

5k

10k

20k

Polar Response

 

 

 

Frequency (Hz)

 

 

 

 

2

Page 2
Image 2
Peavey Studio Pro M2 specifications