Peavey Supreme manual Preamp Section

Rated Power & Load:

Power specs measured with T. Dynamics @ 10%

100 W RMS into 16, 8, or

4 ohms

Power @ Clipping: (typically)

(5% THD, 1 kHz, 120 V AC line)

100 W RMS into 16, 8, or

4 ohms

Frequency Response:

+O, 3 dB, 60 Hz to 20 kHz, @80WRMS

Hum & Noise:

Greater than 86 dB below rated power

Power Consumption:

Domestic: 300 W @ 60 Hz,

120 VAC

Export: 300 W @ 50/60 Hz,

220-230/240 V AC

PREAMP SECTION

The following specs are measured @

I kHz with the controls preset as follows: Push Bright, Off (out)

Channel Select Normal (out) Low& High @ 10

Mid 63 0 Presence @ 0 dB

Pre & Post Gain @ 10

Gain & Thrash, Off (out)

Normal Levels are with normal volume 625

Minimum Levels are with normal volume @ IO

SPECIFICATIONS

Preamp High Gain Input:

Impedance: High-Z, 1 M ohm

Nominal Input Level: -14 dBV, 200 mV RMS

Minimum Input Level: -24 dBV, 60 mV RMS

Maximum Input Level: 0 dBV, 1 VRMS

Preamp Low Gain Input:

Impedance: High-Z, 44 K ohms

Nominal Input Level: -8 dBV, 400 mV RMS

Minimum Input Level: -18 dBV, 120 mV RMS

Maximum Input Level: 6 dBV, 2 V R M S

Effects Send:

Load Impedance: 1 K ohm or greater

Nominal Output Level: -10 dBV,

0.3V RMS or 0 dBV, 1 V RMS if Effects Level is in

Effects Return:

Impedance: High-Z, 22 K ohms

Designed Input Level: -10 dBV,

0.3V RMS or 0 dBV, 1 V RMS if Effects Level is in

(Switching jack provides Effects Send to

Effects Return connection when not used)

Preamp Output:

Load Impedance: 1 K ohm or greater

Nominal Output Level: 0 dBV, 1 VRMS

Power Amp Input:

Impedance: High-Z, 30 K ohms

Designed Input Level: 0 dBV, 1 VRMS

(Switching jack provides preamp output to power amp input connection when not

used)

System Hum & Noise @

Nominal Input Level:

(20 Hz to 20 kHz un weigh ted)

72 dB below rated power

Equalization:

Special low, mid, & high passive type EQ

Presence: +6 dB @ 5 kHz

Push Bright: +6 dB @ 2 kHz

Push Thrash: -20 dB notch @ 1 kHz in Lead channel

Push Gain: Increases Lead gain

Push Resonance: +6 dB @ cabinet resonance

External Footswitch Functions:

Lead Channel Defeat (when

selected with button)

Effects Loop Bypass

Dimensions & Weight:

10.25” H x 24.375” W x 11.25” D 35.7 Ibs.

A

Due to our eforts for constant improvements,

features and specl$cations listed herein are subject to change without notice.