Peavey UA 35T II user service Features, ¥ 35 watts into 4 ohms ¥ Mic/page inputs screw terminals

WARNING!

DO NOT ATTEMPT TO INSTALL THIS UNIT WHILE IT OR ANY CONNECTING UNITS ARE POWERED ON. RISK OF ELECTRICAL SHOCK EXISTS IF ALL UNITS ARE NOT POWERED OFF DURING INSTALLATION. TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

FEATURES

¥35 watts into 4 ohms

¥Mic/page inputs (screw terminals)

¥Mic/page select switch

¥Dedicated program input (screw terminals and RCA jacks)

¥Bass and treble controls

¥Mic/page level control

¥AUX level control

¥Direct 4 ohms output (screw terminals)

¥Completely isolated 8 ohms, 25 volt, and 70 volt outputs (screw terminals)

¥Shelf-top or wall-mountable chassis

DESCRIPTION

The UAª 35T II is a high quality utility amplifier ideally suited for varying installation requirements. It produces 35 watts into 4 ohms and 8 ohms direct connections plus a broad range of line amplification. Level controls are provided for mic/page and AUX. The mic/page input is accessed via screw terminals or RCA jacks. Bass and treble controls are functional on the total system (mic/page/AUX). When a signal is present at the mic/page input, the AUX input is muted. This feature is internally defeatable when required.

Twenty-five and seventy volt line output capability is standard equipment, and the unit is packaged for shelf or wall mounting convenience. The user-friendly control layout, coupled with state-of-the-art circuit design, ensure reliable long-term operation and smooth trouble-free installation.

WALL OR SHELF MOUNTING

The UA 35T II can be mounted on a vertical or horizon- tal surface using the brackets formed on the bottom panel. For mounting on a wooden or paneled surface, use No. 6 x 1/2" or larger wood screws. For mounting onto a masonry or drywall type surface, use fasteners that are designed for this purpose.

7

8

5

9

2 3

6

1 4

MIC/PAGE LEVEL CONTROL (1)

Controls the signal level at the mic/page inputs. (See mic/page switch (7).)

AUX LEVEL CONTROL (2)

Controls the signal level at the AUX inputs.

LOW EQ CONTROL (BASS) (4)

Active equalization control that adjusts the low frequency response. Clockwise rotation boosts lows while counterclockwise rotation provides a cut (reduction) of the low frequencies (±10 dB).

HIGH EQ CONTROL (TREBLE) (3)

Active equalization control that adjusts the high frequency response. Clockwise rotation boosts highs while counterclock- wise rotation provides a cut (reduction) of the high frequencies (±10 dB).

AUX IN (5)

Accepts signals from other sources, such as another mixer or background music source. Signal level at this input is controlled by the AUX level control and is fed to the Master output.

POWER LED (6)

Green LED illuminates when power is being supplied to the unit.

2