ISSUED: 2-19-98 SHEET #: 073-9003-1 08-26-04
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com
3 of 5
For Concrete Ceilings drill four 5/16" (8 mm)
dia. holes to a minimum depth of 1 3/4" (45
mm). Attach ceiling plate (P) using concrete
expansion anchors as shown (left and next
page). Tighten to 80 in • lb (9 N.M.) maximum
torque.
Snap end caps (Q) into place.
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
WARNING
P
Q
Q
∅ 5/16" (8 mm)
concrete
anchor
CUTAWA Y VIEW
• Always attach concrete expansion anchors directly to
load-bearing concrete.
• Never attach concrete expansion anchors to concrete
covered with plaster, drywall or other finishing material.
WARNING
• Tighten concrete anchor bolts firmly, but do not
overtighten. Overtightening can damage the bolts,
greatly reducing their holding power.
• Never tighten in excess of 80 in • lb (9 N.M.).
WARNING
STEP1: Hammer
in concrete
anchor.
STEP2: Tighten to 80 in • lb (9
N.M.) maximum torque to
expand anchors.
Cross Section: Attachment
to a concrete ceiling.
CONCRETE ANCHORINSTALLATION
FOR PRODUCT SAFETY USE
ONLY...
RAWLTM #5005 OR HILTITM
HL814 CONCRETE ANCHORS
[.312 x 1.625 (8 mm x 41 mm)].
ORDER ACCESSORY FAS-
TENER KIT #ACC 210
ceiling