6 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-5 06-02-10
H
H
C D
C
I
E
Detail 5
Fasten two support brackets (C) to vertical supports (D) using four #10-32 x 3/8 thumb screws (H).
Slide support brackets (C) up until bottom of SMARTboard rests on support as shown in detail 5.
Tighten four #10-32 x 3/8 thumb screws (H).
6
Fasten knob (I) through outside hole in support bracket (C) to determine rubber bumper (E) placement.
Secure rubber bumper (E) to board.
Repeat on opposite side of board.
7
C