Attaching Adapter Plate to Screen with VESA 200 x 100 or 200 x 200 Mounting Pattern For PT632 and PWV220/BK
3 | Attach mounting plate (B) to adapter plate (C) using | C |
four M5 x 6 mm screws (M) and four #10 washers (N) | ||
| as shown. | N |
M
B
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail.
3-1 FOR VESA 200 x 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter plate (C) to back of screen using four M4 x 10 mm screws (F) as shown below.
*NOTE: If screw (F) gets less than three threads of engagement, attach adapter plate (C) to back of screen using four M4 x 20 mm screws (G) and four spacers (H) as indicated below.
FOR VESA 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter plate (C) to back of screen using four M6 x 12 mm screws (J) as shown below.
*NOTE: If screw (J) gets less than three threads of engagement, attach adapter plate (C) to back of screen using four M6 x 20 mm screws (K). If screw (K) still gets less than three threads of engagement, use four M6 x 30 mm screws (L).
F C
*For screens with a hole pattern in a pocket, spacers (H) go between adapter plate (C) and
screen.H
C
J
7 of 34 | ISSUED: |
