AttachingAdapterPlatetoScreenwithVESA200x200MountingPattern
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
2 | Choose hole pattern as shown in figure 2.3. Attach |
adapter plate (B) to back of screen using four M6 x |
12 mm screws (F) as shown.
Note: Orientation of "UP" arrow is critical.
*Note: If screw (F) gets less than three threads of engagement, attach adapter plate (B) to back of screen using four M6 x 20 mm screws (G). If screw (G) still gets less than three threads of engagement, use four M6 x 30 mm screws (H).
Skip to step 3 on page 6.
B
F
fig 2.3
AttachingAdapterPlatetoPLPModelAdapterBracket
For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or call customer care for a screen specific adapter bracket (PLP models).
Note: Refer to PLP model adapter bracket instruction sheet for attachment of adapter bracket to screen.
4 | Choose hole pattern as shown in figure 4.4. Attach |
adapter plate (D) to back of screen using four M10 x |
15 mm screws (E) as shown. Tighten screws using 6 mm allen wrench (L).
Note: Orientation of "UP" arrow is critical.
GENERICADAPTER BRACKET
D
E
fig 4.4
5 of 6 | ISSUED: |
