Peg-Perego FINA0601I60 Folding UP the High Chair, Removing the High Chair Cover, Accessory Line

Models: FINA0601I60

1 16
Download 16 pages 8.14 Kb
Page 9
Image 9

child in the high chair.

CLOSING AND OPENING THE TRAY 17• To close the tray, pull it out to the third

position marked with the red notches shown by the arrows in the figure.

18• Press button No. 1.

19• Press button No. 2, while lifting the tray upwards until it clicks into place.

To open the tray again, press button No. 2 and lower the tray to the first or second position.

FOLDING UP THE HIGH CHAIR

Before folding up the high chair:

-Close the tray.

-Return the backrest to the upright position.

-Lower the high chair to the lowest position.

-Close the footrest.

20• Unlock safety device A, by turning it in the direction shown by the arrow, then press pedal B.

21• Hold the high chair as shown in the figure while unlocking the safety device and pressing the pedal, and pull upwards.

The high chair stands upright when it is closed.

REMOVING THE HIGH CHAIR COVER

22• To remove the high chair cover, remove the safety belt from under the chair and the backrest.

23• Lower the high chair completely, and unbutton the cover from the sides of the backrest. Slip the cover off the top of the high chair.

FOLDING THE HIGH CHAIR BACK UP INTO ITS PACKING POSITION

To fold the high chair back up into its “packing position” (for transporting it or storing it in its box):

-Remove the tray.

-Return the backrest to the upright position.

-Lower the high chair to the lowest position.

-Close the footrest.

24• A small screwdriver is necessary for this step. Press the side button while slipping the screwdriver into the slit. Push to the right.

25• Repeat the same operation, pushing the screwdriver to the left and lowering the high chair to the lowest position (the position in which it cannot be used).

Fold the high chair up and place it in its box.

ACCESSORY LINE

26• Centro Gioco: to attach the Centro Gioco, place it as shown in the figure, and attach. Do not attach the toy to the meal tray.

CLEANING & MAINTENANCE

Your product requires only minimal maintenance. Cleaning and maintenance operations must be performed only by adults.

Be sure to keep all moving parts clean, lubricating them with light oil if necessary.

Dry off metal parts to prevent rusting.

Regularly clean the plastic parts with a damp cloth. Do not use solvents or similar products.

Remove any dust and sand from the wheels.

Protect the product against smog, water, rain and snow. Continued and extended exposure to sunlight can change the colours of many materials.

Store the product in a dry area.

If the bag is made of PVC, do not soak it in water but clean it with a damp cloth and neutral soap.

WARNING

ALL ASSEMBLY AND OPERATING PROCEDURES SHOULD BE PERFORMED BY AN ADULT; DO NOT USE THE PRODUCT IF IT HAS BROKEN OR MISSING PARTS.

PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT; ALWAYS USE COMPLETE

5 POINT SEATBELT; THE CHILD SHOULD BE SECURED IN THE HIGH CHAIR AT ALL TIMES, EITHER IN THE RECLINED OR IN THE UPRIGHT POSITION.

NEVER LEAVE THE CHILD UNATTENDED; ALWAYS KEEP CHILD IN VIEW WHILE IN THE HIGHCHAIR.

TRAY AND ACCESSORY TRAYS ARE NOT DESIGNED TO SUPPORT THE CHILDʼS WEIGHT; TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE CHAIR.

ALWAYS USE THE HIGHCHAIR ON A FLAT, HORIZONTAL SURFACE.

IT IS RECOMMENDED THAT THE HIGH CHAIR BE USED IN THE UPRIGHT POSITION ONLY BY CHILDREN CAPABLE OF SITTING UPRIGHT.

BE CAREFUL OF WHERE YOU PLACE THE PRODUCT. AVOID PLACING THE CHILD NEAR SAFETY HAZARDS

Page 9
Image 9
Peg-Perego FINA0601I60 Folding UP the High Chair, Removing the High Chair Cover, Accessory Line, Cleaning & Maintenance