EN•ENGLISH
•IMPORTANT: carefully read instructions and keep for future use.
The childʼs safety could be put at risk if the instructions are not followed.
•PEG PEREGO reserves the right to make any necessary changes or improvements to the products shown at any time without notice.
Peg Perego S.p.A. is an ISO 9001 certified company.
The fact that we are certified provides a guarantee of our honesty for our customers, and fosters trust in the companyʼs way of working.
CUSTOMER SERVICE
If parts of the model are accidentally lost or damaged, use only original Peg Perego spare parts. Contact the Peg Perego Customer Service for all repair work, replacements, information about products, and sale of original spare parts and accessories, at the following: tel.:
fax:
Peg Perego is at the consumer's service, meeting every need in the best way possible. This is why our customers' opinions are so important and valuable to us. We would be very grateful if you would kindly fill in the CUSTOMER SATISFACTION QUESTIONNAIRE after using one of our products. You will find the questionnaire on the Internet at "www.pegperego.
Please note any observations or suggestions you may have on the questionnaire.
INSTRUCTIONS FOR USE
PACKAGING
1• Before using the bassinet unit, remove the safety hooks from the sides.
HOOD
2• To raise the hood, pull it up until both sides click into place.
3• To lower the hood, press the two buttons on the mounts and then push it downward as shown in the figure.
4• When you open the zipper, the hood has a net insert that guarantees better ventilation for your baby and that allows you to see the baby from all angles.
COVER
5• The cover can easily be attached or removed using the zipper.
HANDLEBAR
6• To raise the handlebar, pull it up until it clicks into place. The handlebar is locked only when it is in the vertical position and the two blocks have been inserted in their housings.
7• To lower the handlebar, release it by pushing up the two blocks and then push the handlebar downward.
8• The handlebar makes it easier to carry and hook the bassinet unit onto the chassis and strollers.
POSITION OF ROCKER AND CRIB
9• The Navetta base is specially shaped so it will rock
when set on a flat surface.
10• Navetta also becomes a regular crib that doesnʼt rock: simply pull out the incorporated stands as shown in the figure.
ADJUSTING THE BACKREST
11• The height of the backrest can be adjusted by pulling it up and turning the handle, as shown in the figure.
ADJUSTING THE AIR CIRCULATION
12• The Navetta base features holes that can be opened to allow air to flow into it from below.
To open the holes in the front of Navetta (the side where the hood is located), push the two hooks toward the outside.
13• To open the holes from the rear (the side opposite the hood), push one of the two hooks toward the outside.
REMOVABLE LINING
14• To remove the hood, unbutton it from the sides and slip it out of the hooks.
15• To remove the lining, unbutton it from the sides and slip it off the front.
16• Unbutton the lining from the back and remove it.
ATTACHING AND DETACHING THE BASSINET UNIT ON STROLLERS
The Navetta Bassinet Unit is equipped with the Ganciomatic System, to attach it to the Ganciomatic hooks on the Pliko P3, GT3 and Centro.
17• To attach the bassinet unit to the stroller, consult the userʼs manual to see how to raise the Ganciomatic hooks on the stroller. Place the bassinet unit turned towards you, and push downwards until it clicks.
18• To detach the bassinet unit from the stroller, push the handle (on the opposite side from the hood) sideways then upwards, while lifting the bassinet unit by the handle.
USING NAVETTA IN THE CAR
19• Navetta is designed to turn into Navetta AUTO when you use the two hooks (shown in the figure) together with the special Auto Kit that is available for purchase separately.
BASSINET UNIT/STROLLER
•When the baby is bigger, the lining can be removed from the bassinet unit and used as a spare sack with a cover for the stroller.
•Remove the lining from the bassinet unit.
20• Slip the bassinet unit lining over the stroller seat, as shown in the figure.
21• Unfasten the stroller safety belt and slip it through the openings in the bassinet unit lining.
•The safety lap belts go through the two outer side openings.
22• Tuck the bassinet unit lining around the stroller footboard, as shown in the figure. Fold the top part of the lining over the back of the stroller, as shown in the figure.
23• Button the lining at the sides, as shown in the figure.
24• Turn the lining cover down over the front bar, fastening it to the zipper tabs at the sides with the Velcro fasteners.
ACCESSORY LINE
25• Navetta Auto Kit: Request the auto kit (ECE R44/04 certified), which contains everything you need for mounting the bassinet unit in your car.
26• Cover All Rain Canopy: Rain canopy made of clear PVC, guarantees complete protection when the
