How do I clean the lens of my Pelco Home Security System?

To clean the lens, use a soft brush or clean compressed air to remove dust. Avoid touching the lens and use lens cleaning paper or a clean cotton cloth with a little cleaning liquid to remove fingerprints or oil stains.

Where can I find technical specifications for Pelco Home Security System?

You can find technical specifications from Pelco by accessing their Product Specification Book, using Pelco's B.O.S.S. Software, or visiting their website at www.pelco.com.

How do I properly recycle my Pelco Home Security System equipment?

To comply with the requirements of Directive 2002/96/EC, contact your local dealer for procedures for recycling this equipment.

Routine Servicing, Lens and Connector Wiring Diagrams

Routine Servicing

Never touch the surface of the lens.

Remove dust from the lens using a soft brush or clean compressed air. Avoid touching the lens surface during handling.

To remove fingerprints or oil stains from the lens surface, use lens cleaning paper or a clean cotton cloth with a little cleaning liquid. Then, wipe off the stains using a light circular motion, starting from the center of the lens surface. Wipe the lens body with a silicon cloth. Do not use any organic solvents such as thinner or benzene.

Lens and Connector Wiring Diagrams

Pelco VD Type Lenses

TO CAMERA AUTO-IRIS SOCKET, DC DRIVE

3 1

	DRIVE ( + )	RED
	DRIVE ( + )	RED
	DRIVE ( – )	BLACK
	DRIVE ( – )	BLACK
CONTROL ( + )		G IRIS
		YELLOW
		YELLOW
CONTROL ( – )		GREEN
CONTROL ( – )		GREEN

AUTO-IRIS PLUG PIN-OUT	4-PIN SQUARE CONNECTOR	4-CONDUCTOR
		CABLE
(REAR OF PLUG, SOLDER LUGS)

Pelco VV Type Lenses

TO CAMERA AUTO-IRIS SOCKET, VIDEO DRIVE

DC+ (8-16)		RED

GROUND		BLACK

	VIDEO	WHITE

REMOTE		GREEN

AUTO-

IRIS

CIRCUIT

G IRIS

AUTO-IRIS PLUG PIN-OUT	4-PIN SQUARE CONNECTOR	4-CONDUCTOR CABLE
(REAR OF PLUG, SOLDER LUGS)

Specifications

Technical specifications are available from Pelco by any of the following methods:

•Product Specification Book

•Pelco’s B.O.S.S.® Software

•Web Site, Pelco Online at www.pelco.com

(Design and product specifications subject to change without notice.)

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

REVISION HISTORY

Manual #	Date	Comments
C748M-B	11/05	Added information on VDIR lenses. Reformatted manual.
C748M-C	11/06	Removed information on VDIR lenses.
Pelco, the Pelco logo, and B.O.S.S. are registered trademarks of Pelco.			©Copyright 2006, Pelco. All rights reserved.

Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com

USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150

International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120

Pelco 13VA5-40, 13VD3.5-8 Routine Servicing, Lens and Connector Wiring Diagrams, Specifications

Models: 12VD6-13 13VA2.5-6 13VD1-3 13VA2.8-12 12VA6-13 13VA1-3 13VA3-8 12VD4-10 13VA5-50 13VA3.5-8 13VA5.5-82.5 13VA5-40 13VD5-40 13VD3.5-8