Pelco BKMT10/230 installation manual C468M INSTALLATION MANUAL, Scope, Installation, Description

C468M

INSTALLATION MANUAL

BKMT10,BKMT10/230,ANDBKMT10/24

BLOWER KITS

®

1.0 SCOPE 3.0 INSTALLATION

The information contained within this manual pertains to the BKMT10, BKMT10/230, and BKMT10/24 blower kits.

Installation should be in accordance with all applicable local and national electric codes, utilizing approved materials only.

2.0 DESCRIPTION

The BKMT10, BKMT10/230, and BKMT10/24 are continuous duty blower kits designed for use in either the HT10V or MT10P liquid cooled enclosures.

Install the blower kit in either the HT10V or MT10P enclosure as outlined below.

1.Remove the rear plate of the enclosure, and then remove the camera sled.

2.Assemble blower/blower bracket to sled as shown in Figure 1, items 1–4.

3.Install sled into enclosure.

4.Wire blower to power source using butt splices provided.

5.Re-install rear plate of the enclosure.

2.1 MODELS

BKMT10	Blower kit, 6.7 watts @ 120 VAC,
	60 Hz, 33 cfm
BKMT10/230	Blower kit, 8.9 watts @ 230 VAC,
	50 Hz, 27 cfm
BKMT10/24	Blower kit, 1.92 watts @ 24 VDC
	(AC rectified), 30 cfm

Item	Description	Part Number
1	1/4-20 bolt	ZH1/420X.750SFS
2	Fan bracket	BK40004001COMP
3	Washer	ZH260X562X65C
4	Nut	ZH1/420NUTCHN
5	Fan Securement
	Assembly
	Screw	ZH4-40X.500SPP (Qty. 4)
	Washer	ZH4LWSIS (Qty. 4)
	Nut	ZH4-40NUTSH (Qty. 4)
6	Fans
	24 VDC	EH4600105W3
	120 VAC	EH4600115W3
	230 VAC	EH4600123W3

Figure 1. BKMT10 Series Blower Kit Installation

REVISION A — 12/93 1