Installation, Parts List, Hard Ceiling

Installation

PARTS LIST

Qty Description

1Back box, trim ring, and dome

1Compass tool

1Safety chain bracket

11/4-20 x 1/2-inch bolt

11/4-inch flat washer

11/4-inch lock washer

HARD CEILING

1.Locate the center point of the mounting location. Drill a hole in the ceiling using a 3/32-inch drill. Insert the compass tool into the hole. Use a pencil and the compass tool to draw a circle on the ceiling. Carefully cut out the circle.

Figure 1. Preparing the Ceiling

2.Attach a conduit fitting (not supplied), lock nut (not supplied), and safety chain bracket. Install a safety chain/cable (not supplied) that will support up to 16 pounds (7.3 kg). Install one end of the safety chain/cable to the safety chain bracket and the other end to a support structure in the ceiling.

3.Prepare the wiring for camera and lens power; refer to Table A on page 6 and Table B on page 7 for wiring distances. Pull the wiring into the back box through the conduit fitting.

4.Compress the spring clips on the back box and push it through the hole until the clips spring back. Tighten the screws until you hear a clicking noise.

ATTACH SAFETY CHAIN HERE

NOT SUPPLIED

CEILING

Figure 2. Installing the Back Box