C1510M-QS – CM9760-SAT Quick Start Reference Guide
–5–
SYSTEM ONLY (Continued)
System-only implementation of alarms also requires that configuration files be programmed on the 9760 SIDE of the configuration. In the
Systems Configuration file, specify an Alarm Control Mode of operation.
More importantly, in the Comms Configuration file:
Assign alarm monitors for the 9760 operator
to view alarms on.
Of equal importance is the CC1 Alarms file:
Fill in the alarm information fields opposite
the physical alarm # that matches the System Alarm
# entered in the contact menu of the SAT Alarms
file (see the SYSTEM ALARMS column reference
under SYSTEM ONLY in the SAT Alarm Menu).
FIGURE 7
FIGURE 8
➟
➟
➟