Pelco Manual C1911M (4/98) 3

1.0 GENERAL

1.1 IMPORTANT SAFEGUARDS AND WARNINGS

Please thoroughly familiarize yourself with the information in this manual prior to
installation and operation.
Read Instructions
Safety and operating instructions should be read before the monitor is operated.
Retain Instructions
Safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the monitor and in the operating instructions should be followed.
Follow Instructions
All operating and use instructions should be followed.
Cleaning
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments
Use only attachments recommended by Pelco.
Water and Moisture
Do not use this monitor near water - for example, near a kitchen sink, in a wet
basement or near a swimming pool - unless the monitor is specifically marked “For
Use in Wet Locations.”
Accessories
Do not place this monitor on an unstable cart, stand, table, or mount. The monitor
may fall, causing serious injury to a child or adult and serious damage to the moni-
tor. Use only with a mount recommended by Pelco. When mounting the monitor,
follow Pelco’s installation instructions, and use only mounting accessories recom-
mended by Pelco.
Cart & Stand
A monitor and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the monitor and cart combination to over-
turn.
Ventilation
Slots and openings in the cabinet are provided for ventilation to ensure reliable
operation of the monitor and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked by placing the
monitor on furniture, carpet, or similar surfaces. The monitor should never be placed
near or over radiators or heat registers. This monitor should not be placed in a built-
in installation, such as a bookcase or rack, unless proper ventilation is provided.
Power Sources
This monitor should only be operated from the type of power source indicated on
the back panel label. If you are not sure of the type of power to your installation
location, consult your local electrical building official or power company.
Grounding
This monitor is equipped with a grounding plug. This plug will only fit into a ground-
ing outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the grounding
plug since it is provided to ensure your safety.