16 C2462M-B (10/05)
REINSTALL THE DOME

DOME LINER INSTALLATION

If the unit is supplied with a dome liner, reinstall the liner before installing the bubble. To install the
liner refer to Figure 13 and do the following:
1. Align the studs located on the camera module with the clips on the liner.
2. Lightly pinch the sides of the liner, opposite from the clips, and place clips over the studs.
3. Once the liner is secure, position the viewing window of the liner over the lens of the camera.
4. Install the bubble.
Figure 13. How to Install the Dome Liner
Figure 14. How to Install the Bubble

BUBBLE INSTALLATION

To install the bubble refer to
Figure14 and do the following:
1. Align the standoffs of the
bubble with the slots of the
back box.
2. Turn the bubble clockwise,
untilit locks in place.