Pelco Manual C586M (9/99) 21
OPERATION KEYBOARD COMMAND RESULT
Table C. Operation Guide (Continued)
1.Press the MAIN MONITOR key. The green LED over the
MAIN key lights.
2.On the number pad, press the address number of the
multiplexer (1-16 if the keyboard is connected to a
multiplexer; 1-8 if the keyboard is connected to a
server), then press the UNIT key. The LED displays the
address.
3.Press the LIVE/VCR key to put the multiplexer in the
playback mode.
4.Select the cameras to play back from one of the
following choices:
• For an individual camera, press the number of the
camera, then press the CAM key. If switch 7 is OFF,
enter a camera number from 1-16. If switch 7 is ON,
refer to Table D for camera numbers.
• For multiple camera display, press the key below the
4, 9, or 16 icon.
• For sequencing, select an individual or multiple
camera display, then press the SEQ button.
5.Turn on the VCR and press the PLAY button.
Play a tape. Displays the recorded cameras in
the selected format on the MAIN
monitor.
Table D. Camera Numbers with Switch 7 ON
Multiplexer Cameras
9-channel 16-channel
1 1-9 1-16
2 17-25 17-32
3 33-41 33-48
4 49-57 49-64
5 65-73 65-80
6 81-89 81-96
7 97-105 97-112
8 113-121 113-128
9 129-137 129-144
10 145-153 145-160
11 161-169 161-176
12 177-185 177-192
13 193-201 193-208
14 209-217 209-224
15 225-233 225-240
16 241-249 241-256
Record a tape. Records all cameras connected to
the multiplexer.
For simplex multiplexer, while the
multiplexer is in the record mode
(DISPLAY/RECORD LED on ON)
you can only see a full-screen view
of one camera (or one camera at a
time if sequencing) on the main
monitor, but all active cameras are
being recorded. REC appears in
upper left corner of monitor.
For duplex multiplexer, recording is done automatically.
For simplex multiplexer, the multiplexer must be in the
record mode (DISPLAY/RECORD LED is ON).