C626M-B (3/05) 177DX8000 Emergency Agent
Before You Begin
Ensure that the following requirements have been met before starting the Emergency Agent application:
1. Make sure there is at least one active DX8000 Series DVR available on your network and your PC computer is set up to access it. Consult
your network administrator for more information.
2. Install the DX8000 Emergency Agent application on your PC computer if you have not done so already. Refer to Installing the Client
Emergency Agent Application on page 173 for instructions.
3. Make sure that Emergency Agent notiļ¬cation is set up on one or more DX8000 Series DVRs, and that your PC has been selected to receive
emergency notiļ¬cations. Refer to the Operation and Programming Manual for more information.
4. Make sure IPSec security services are installed and enabled on your PC. Refer to Installing the Client Emergency Agent Application on
page 173 and Enabling IPSec Security Services on page 176 for more information.