Pelco Manual C673M (2/01) 51

SHUTTLE RING
You can set the playback speed using the SHUTTLE ring.
1. Press PAUSE during playback to get a still picture.
2. Turn the SHUTTLE ring right or left to get the playback speed you want.
3. Cancel by pressing PAUSE to get a still picture and then pressing it again to return to
the playback.
Playback speed varies according to the angle of the SHUTTLE ring (as shown in Figure 26).
When the SHUTTLE ring is released, it comes back to the center position and the playback
picture stays still.
( ) indicates the playback speed of the recorded tape in 2H mode.
1. Reverse high speed search 7. Slow playback
2. Reverse speed search 8. Normal playback
3. Reverse fast playback (x3) 9. Fast playback (x2)
4. Reverse playback 10. Forward speed search
5. Reverse slow 11. Forward high speed search
6. Still

Figure 26. Shuttle Ring Speed Settings

DIRECT SHUTTLE RING
You can also change the playback speed without entering pause mode by turning the
SHUTTLE ring during playback, as shown below.
( ) indicates the playback speed of the recorded tape in 2H mode.
1. Reverse high speed search 5. Fast playback (x2)
2. Reverse speed search 6. Forward speed search
3. Reverse fast playback (x3) 7. Forward high speed search
4. Normal playback

Figure 27. Direct Shuttle Ring Speed Settings

15(7)
9(5)
2
1/7
1/15
1/30
1/30
1/15
1/7
9(5)
15(7)
3
1
2
3
4
567
8
9
10
11
00485
3
9(5)
15(7)
2
9(5)
15(7)
1
2
345
6
7
00486