10 Pelco Manual C682M-E (11/01)
DX7000 SYSTEM SETUP
To setup the DX7000 Digital Video Recorder use the left mouse button and click on the
SETUP button located in the DISPLAY mode.
CAMERA SETUP
Figure 6. Channel Setup Menu
1CAMERA NAME Box
2SIGNAL TYPE – Selection must correspond with the NTSC/PAL selection switch
setting. Refer to Figure 1, item 7 .
3CAMERA ENABLE Button
4CAMERA SELECTION Button
Use the following steps to set up a camera site.
1. Click the CAMERA ENABLE button to enable a camera for setup.
2. Click the CAMERA SELECTION button (located above the CAMERA ENABLE button);
the camera scene appears in the Camera Viewing Window.
3. Enter the location of the camera in the CAMERA NAME box.
1
2
3
4
01177