SPECIFICATIONS
ELECTRICAL/VIDEO |
|
Input Voltage: | |
Power Consumption: | 250W maximum |
Recording Resolution |
|
NTSC: | 352 x 240 pixels |
PAL: | 384 x 288 pixels |
Compression: | MPEG1 |
Compressed Image Size: | 352 x 240; average 1.4 kB |
Remote Control: | Full remote control via TCP/IP network |
MECHANICAL |
|
SCSI Connector: | Recorder interface |
GENERAL |
|
Operating Temperature: | 41° to 104°F (5° to 40°C) |
Relative Humidity: | Maximum 80% |
Dimensions |
|
Desktop: | 7.3 (H) x 17.0 (W) x 19.6 (D) inches (18.5 x 43.2 x 49.8 cm) |
Rack Mount: | 7.0 (H) x 19.0 (W) x 19.6 (D) inches (17.8 x 48.3 x 49.8 cm) |
Unit weight: | 45 lb (20.4 kg) maximum (fully equipped) |
(Design and product specifications subject to change without notice.)
REGULATORY NOTICES
This equipment has been tested and found to comply with the limits of a Class A digital de- vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi- ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
|
|
|
|
|
|
|
|
| WARRANTY AND RETURN INFORMATION |
| |
| WARRANTY |
|
| If a warranty repair is required, the Dealer must contact Pelco at (800) |
|
| Pelco will repair or replace, without charge, any merchandise proved defective | or (559) |
| ||
| in material or workmanship for a period of one year after the date of shipment. | the following information: |
| ||
| Exceptions to this warranty are as noted below: | 1. Model and serial number |
| ||
|
|
|
|
| |
| • Five years on Pelco manufactured cameras (CC3500/CC3600 and MC3500/ | 2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number |
| ||
| MC3600 Series); two years on all other cameras. | 3. Details of the defect or problem |
| ||
| • Three years on Genex™ Series (multiplexers, server, and keyboard). | If there is a dispute regarding the warranty of a product which does not fall under |
| ||
| • Two years on all standard motorized and fixed focal length lenses. |
| |||
| the warranty conditions stated above, please include a written explanation with |
| |||
| • Two years on Legacy®, Camclosure™ Camera Systems, CM6700/CM6800/ |
| |||
| CM8500/CM9500/CM9740/CM9750/CM9760 Matrix, DF5 Series and DF8 | the product when returned. |
| ||
|
|
| |||
| Fixed Dome products. |
| Method of return shipment shall be the same or equal to the method by which |
| |
| • Two years on Spectra® and Esprit™, including when used in continuous mo- | the item was received by Pelco. |
| ||
| tion applications. |
| RETURNS |
| |
| • Two years on WW5700 series window wiper (excluding wiper blades). |
| |||
| In order to expedite parts returned to the factory for repair or credit, please call |
| |||
| • Eighteen months on DX Series digital video recorders. |
| |||
| the factory at (800) |
| |||
| • Six months on all pan and tilts, scanners or preset lenses used in continu- |
| |||
| (CA number if returned for credit, and RA number if returned for repair). Goods |
| |||
| ous motion applications (that is, preset scan, tour and auto scan modes). |
| |||
| returned for repair or credit should be clearly identified with the assigned CA/RA |
| |||
| Pelco assumes no risk and shall be subject to no liability for damages or loss |
| |||
| number and freight should be prepaid. All merchandise returned for credit may |
| |||
| resulting from the specific use or application made of the Products. Pelco’s li- | be subject to a 20% restocking and refurbishing charge. |
| ||
| ability for any claim, whether based on breach of contract, negligence, infringe- | Ship freight prepaid to: Pelco |
| ||
| ment of any rights of any party or product liability, relating to the Products shall |
| |||
| 3500 Pelco Way |
| |||
| not exceed the price paid by the Dealer to Pelco for such Products. In no event |
| |||
| Clovis, CA |
| |||
| will Pelco be liable for any special, incidental or consequential damages (includ- |
| |||
|
|
| |||
| ing loss of use, loss of profit and claims of third parties) however caused, whether |
|
| ||
| by the negligence of Pelco or otherwise. |
|
| ||
| The above warranty provides the Dealer with specific legal rights. The Dealer |
|
| ||
| may also have additional rights, which are subject to variation from state to state. |
|
| ||
|
|
|
| ||
|
|
|
| ||
| REVISION HISTORY |
|
| ||
| Manual # | Date | Comments |
|
|
| C684M | 4/01 | Original version. |
|
|
| 7/01 | Revised Description, Installation, and Connections sections. Added FCC notice. | |||
® Pelco, the Pelco logo, Spectra, Genex, and Legacy are registered trademarks of Pelco. | © Copyright 2001, Pelco | ||||
™ Esprit and Camclosure are trademarks of Pelco. | All rights reserved. |
4 | Pelco Manual |