Pelco CM9760-KBR SETUP MODE TURN OFF SW2, EXIT, SYSTEM 9700

26 C540M-C (10/05)

Operation

ACTIVATING OPERATION MODE

To use the keyboard, you must activate Operation Mode.

1. Select from the Setup Mode. The following message appears on the LCD display.

Figure 35. Setup Mode Exit Message

2. Set DIP Switch 2 OFF.

3. Select . The Log In Display appears on the LCD.

Figure 36. Log In Display

LOGGING IN

To log in, enter your four-digit PIN from the Log In Display. As soon as you enter a number, PIN appears on the LCD display and four asterisks

indicate the numbers of your PIN. The default login PIN is 1234 and can be changed only by the person responsible for programming or creating

the conﬁguration ﬁles for the system.

Figure 37. PIN Number

The following message appears on the LCD display when you enter a PIN successfully.

Figure 38. Monitor Number

SETUP MODE

TURN OFF SW’2, EXIT

v8.24

LCDJSTK A D V

SYSTEM 9700 v8.24

v7.00

SYSTEM 9700 v8.24

v7.00

****

Enter Monitor Num for Keyboard 1

Contents

Main NOTICE Page Page Contents Page List of Illustrations List of Tables Important Safety Instructions Regulatory Notices RADIO AND TELEVISION INTERFERENCE Before You Begin PACKAGE CONTENTS PARTS LIST Description MODELS TOP VIEW BOTTOM VIEW Installation CONNECTIONS ACTIVATING SETUP MODE CHANGING THE SETUP PIN ENTER SETUP PIN SETUP MODE LCDJSTK A D V CHANGING THE DEFINE PIN CALIBRATING THE JOYSTICK MANUALLY JOYSTICK SETUP CALIBRATING THE JOYSTICK AUTOMATICALLY ADJUSTING THE DISPLAY BRIGHTNESS LCD BRIGHTNESS SETUP DIRECT CAMERA CONTROL Page Page DIRECT CAMERA CONTROL FOR NON-PELCO MUX CONFIGURING THE RELAYS ADJUSTING THE TIME OUT PERIOD SETTING THE CONTROL KEYS FUNCTIONS DOWNLOADING KEYBOARD SETUPS DOWNLOADING KEYBOARD TO KEYBOARD DOWNLOADING THROUGH THE CM9700 SYSTEMS Page Operation ACTIVATING OPERATION MODE LOGGING IN SETUP MODE TURN OFF SW2, EXIT LCDJSTK A D V **** SYSTEM 9700 SELECTING MONITORS SELECTING CAMERAS LOCKING CAMERAS OR INPUT DEVICES OVERRIDING CAMERA CONTROL OVERRIDING CAMERA LOCKS GROUP INPUT SELECTION SELECTING GROUP CAMERAS OPERATING PTZ CAMERAS Advanced Operation PRESETS CREATING PRESETS RECALLING PRESETS DELETING PRESETS CREATING A PRESET LABEL ASSIGNING A PRESET LABEL TO A PRESET LOCATION RECALLING DEFINED PRESETS A PATTERNS CREATING A PATTERN B RECALLING A PATTERN ZONES CREATING A ZONE Page Page PARTIAL ZONE OVERLAP LABEL B PRIORITY 2 EMBEDDED ZONES TURNING ZONES ON AND OFF LABEL B PRIORITY 2 ERASING ZONES DVR AND VCR CONTROL GPI CONTROL MUX CONTROL MACROS LOADING MACROS PAUSING A MACRO DELETING A MACRO Page SETTING THE TIME AND DATE VIDEO LOSS ALARMS ARMING ALARMS DISARMING ALARMS Are you sure logoff? RESETTING ALARMS YES NO LOGGING OUT R DIAGNOSTIC MODE LCD TEST Page Specications ELECTRICAL MECHANICAL GENERAL Page PRODUCT WARRANTY AND RETURN INFORMATION REVISION HISTORY