Pelco CM9760-KBR MUX CONTROL

C540M-C (10/05) 41

MUX CONTROL

You can also control multiplexers with the CM9760-KBD keyboard. You can connect multiplexers to any input and conﬁgure the MUX for

operation within the CM9700 system using the CM9700-MGR. Refer to the CM9700-MGR Software Guide.

To control a multiplexer:

1. Enter a MUX input number from the Main Menu.

2. Press . Each MUX input is associated with a camera input. Figure 63 shows MUX 1 being controlled.

Figure 63. MUX Control Menu

3. Select an icon. The icon functions are described in Table B.

Table B. MUX Control Icons

ICON FUNCTION

Select this icon to bring up the MUX VCR control menu for operating the VCR. The menu appears only if a VCR for

camera recording is connected to the MUX and conﬁgured properly in the software.

Select this icon to toggle the main monitor display between live inputs and playback from the VCR.

Enter a camera number and select this icon. You can go through all 16 screens. Selecting this icon once enables

2X zoom and selecting it twice enables 4X zoom.

Select this icon to display a picture in picture insert on the main monitor display. You can cycle through all

16 screens in the picture insert by entering a camera number and selecting .

Select this icon to bring up 4 of the available 16 screens. You can cycle through all 16 screens, four at a time, by

repeatedly selecting the icon.

Select this icon to bring up 9 of the available 16 screens.

Select this icon to view all 16 available screens at the same time on the main monitor.

11

Contents

Main NOTICE Page Page Contents Page List of Illustrations List of Tables Important Safety Instructions Regulatory Notices RADIO AND TELEVISION INTERFERENCE Before You Begin PACKAGE CONTENTS PARTS LIST Description MODELS TOP VIEW BOTTOM VIEW Installation CONNECTIONS ACTIVATING SETUP MODE CHANGING THE SETUP PIN ENTER SETUP PIN SETUP MODE LCDJSTK A D V CHANGING THE DEFINE PIN CALIBRATING THE JOYSTICK MANUALLY JOYSTICK SETUP CALIBRATING THE JOYSTICK AUTOMATICALLY ADJUSTING THE DISPLAY BRIGHTNESS LCD BRIGHTNESS SETUP DIRECT CAMERA CONTROL Page Page DIRECT CAMERA CONTROL FOR NON-PELCO MUX CONFIGURING THE RELAYS ADJUSTING THE TIME OUT PERIOD SETTING THE CONTROL KEYS FUNCTIONS DOWNLOADING KEYBOARD SETUPS DOWNLOADING KEYBOARD TO KEYBOARD DOWNLOADING THROUGH THE CM9700 SYSTEMS Page Operation ACTIVATING OPERATION MODE LOGGING IN SETUP MODE TURN OFF SW2, EXIT LCDJSTK A D V **** SYSTEM 9700 SELECTING MONITORS SELECTING CAMERAS LOCKING CAMERAS OR INPUT DEVICES OVERRIDING CAMERA CONTROL OVERRIDING CAMERA LOCKS GROUP INPUT SELECTION SELECTING GROUP CAMERAS OPERATING PTZ CAMERAS Advanced Operation PRESETS CREATING PRESETS RECALLING PRESETS DELETING PRESETS CREATING A PRESET LABEL ASSIGNING A PRESET LABEL TO A PRESET LOCATION RECALLING DEFINED PRESETS A PATTERNS CREATING A PATTERN B RECALLING A PATTERN ZONES CREATING A ZONE Page Page PARTIAL ZONE OVERLAP LABEL B PRIORITY 2 EMBEDDED ZONES TURNING ZONES ON AND OFF LABEL B PRIORITY 2 ERASING ZONES DVR AND VCR CONTROL GPI CONTROL MUX CONTROL MACROS LOADING MACROS PAUSING A MACRO DELETING A MACRO Page SETTING THE TIME AND DATE VIDEO LOSS ALARMS ARMING ALARMS DISARMING ALARMS Are you sure logoff? RESETTING ALARMS YES NO LOGGING OUT R DIAGNOSTIC MODE LCD TEST Page Specications ELECTRICAL MECHANICAL GENERAL Page PRODUCT WARRANTY AND RETURN INFORMATION REVISION HISTORY