Pelco DX9116F quick start Setting DATE/TIME Properties, Date and Time

SETTING DATE/TIME PROPERTIES

Follow these steps to set the Date/Time Properties on the recorder and the viewstation. Make sure you close all applications on

the recorder and viewstation.

￿

￿Double-click the time on the system tray. The following page appears.

￿Set the date and time and then click Apply.

￿Click Time Zone. The following page appears.

￿

Figure 3. Date and Time Page

￿

￿

￿

Figure 4. Time Zone Page

￿Select your time zone from the drop-down box. The default is (GMT -08:00) Pacific Time (US & Canada); Tijuana. NOTE: You must restart the system if you change the default time zone setting on the recorder or viewstation.

￿Make sure that the “Automatically adjust clock for daylight saving changes” checkbox is selected, if applicable for the location of installation.

￿Click Apply and then OK.

4 C635M-A-QS (3/09)