42 C307M-I (11/05)
PROPORTIONAL PAN
There are two proportional pan modes:
On: Enables the proportional pan mode. The amount of zoom controls the pan and tilt. At telephoto zoom settings, the pan and tilt speeds will be
slower for a given amount of joystick deflection than at wide zoom settings. This keeps the image from moving too fast on the monitor when
there is a large amount of zoom.
Off: Disables proportional pan mode. The pan speed will not depend on the amount of zoom.
NOTE: Proportional pan is not available during a pattern.
To change the proportional pan mode:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Other.
3. Press the Iris Open button to enter the Other menu.
4. Position the cursor (>) beside Proportional Pan.
5. Press the Iris Open button. The cursor moves to the right, beside the word On or Off.
6. Move the joystick up or down to toggle between On and Off.
7. Select: Press the Iris Open button on your keyboard to select your choice.
Cancel: Press the Iris Close button if you do not want to change the setting.
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Other>
Exit
MAIN MENU
Proportional pan On
Park time minutes 0
Scan Speed deg/s 25
Pattern Length 1.5 min
Spd Profile 50 MPH wind
Exit
Other Menu