Pelco ES40 Technical Specifications, Additional Product Features, Electrical, Mechanical, General

TECHNICAL SPECIFICATIONS

ADDITIONAL PRODUCT FEATURES

•	Deterrent Surveillance
• Integral Multiprotocol (Coaxitron®, RS-422 Pelco D and Pelco P Protocols)
	Receiver/Driver
•	Digital Position and Zoom Control and Feedback Using Pelco D Protocol
•	Integral Camera Enclosure
•	Operational in 145 kph (90 mph) Winds, Can Withstand Wind Velocity up
	to 209 kph (130 mph)
•	Pan Preset Speed of 100°/Sec in 80 kph (50 mph) Winds and 50°/Sec in
	145 kph (90 mph) Winds
•	Variable Scan Speeds (1° to 40°/Sec)
•	Translator Boards for Selected Competitive Protocols
•	Easy to Install: Quick and Simple Electrical Connections
•	24 VAC or 120/230 VAC Selectable
•	Full Continuous-Duty Warranty
•	850 nm and 950 nm Active IR Illumination Focus Algorithms
•	256 Configurable Presets with Labels
•	Auto, Frame, and Random Scan
•	Configurable Power-Up Mode, Park, Manual Limit Stops (Pan), and Scan
	Limit Stops (Pan)
•	Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;
	Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
	to Depth of Zoom
•	8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
	Each
•	Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
•	10-Inch Integrated Enclosure with Pre-Assembled IOP Camera
•	Sun Shroud, Heater/Window Defroster, and Insulation All Standard
•	1 Auxiliary Output
•	Electronic Image Stabilization
•	Image Enhancement
• Multilingual Menus (English, Spanish, Portuguese, Italian, French,
	German, Russian, Polish, Turkish, Czech, and Asian language package:
	Chinese, Japanese, Korean)
•	Software Update and Setup
•	Configurable Locations of Labels and On-Screen Displays

ELECTRICAL

Input Voltage	24, 120, or 230 VAC, 50/60 Hz; switch
	selectable for 120/230 VAC inputs
Input Voltage Range	±10%
Power Consumption	Maximum 70 VA per system
Heater and Defroster	Thermostatically controlled
Electrical Connections	2 power source connections made at mount
	location with wire splices and 1 ground wire
	splice; 1 BNC receptacle and 4 wire splices at
	mount location for RS-422 Pelco D and Pelco P
	protocols; 2 wire splices for open collector
	auxiliary output
Aux 2	Open collector output with 2-second
	activation; connected relay must require no
	more than 32 VDC and 40 mA to energize relay
	coil; wire length between Esprit SE and relay
Video Coaxial Cable	must be less than 30 m (100 ft)
Wiring Distances	Cable Type*	Maximum Distance
	RG59/U	229 m (750 ft)
	RG6/U	305 m (1,000 ft)
	RG11/U	457 m (1,500 ft)

*Minimum cable requirements: 75-ohms impedance; all copper center conductor; all copper braided shield with 95% braid coverage.

MECHANICAL

Pan Movement	360° Continuous pan rotation
Vertical Tilt	Unobstructed +36° to –85°
Variable Pan/Tilt Speed
Pan	0.1° to 40°/sec variable-speed operation,
	100°/sec turbo
Tilt	0.1° to 30°/sec variable-speed operation
Preset Speeds
Pan	100°/sec
Tilt	30°/sec
Camera Mounting	Integrated camera sled assembly
Latches	One link-lock, No. 3 stainless-steel latch; can
	be secured with padlock (not supplied)

•	Configurable Zoom Speeds
•	Low Lux Noise Reduction (reduces noise in low light)
•	Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
	Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
	Translator Card

PRESSURIZED INTEGRATED OPTICS CARTRIDGE (IOC)

•Pressurized to 10 psig, Nominal (Sea Level, 21°C [70°F])

•Internal Sensors for Temperature, Dew Point, and Pressure

•On-Screen Alert for High and Low Temperature, High and Low Pressure, and High Humidity

•4 Alert On-Screen Display Modes

•4 Acknowledge Modes

•Pressurized Relief Valve

•Meets IP67 Standards

GENERAL

Construction

Finish

Viewing Window

Operating Temperature

Operating Environment

Weight

Unit

Standard with IOP With Wiper and IOP Standard with IOC With Wiper and IOC

Shipping Standard with IOP With Wiper and IOP Standard with IOC With Wiper and IOC

Die-cast, extruded and sheet aluminum; stainless steel hardware

Gray polyester powder coat

5.84mm (0.23") thick, optically clear, polycarbonate with proprietary impact- resistant UV rated coating

–45° to 50°C (–50° to 122°F) for sustained system operation or 60°C (140°F) absolute maximum; within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –25°C (–13°F)

Will remain operational in 145 kph (90 mph) wind conditions;

withstands 209 kph (130 mph)

With	With
Pedestal Adapter	Wall Mount
9.0 kg (20 lb)	9.9 kg (22 lb)
9.5 kg (21 lb)	10.4 kg (23 lb)
9.5 kg (21 lb)	10.4 kg (23 lb)
10.0 kg (22 lb)	11.0 kg (24 lb)
11.3 kg (25 lb)	12.6 kg (28 lb)
11.7 kg (26 lb)	13.1 kg (29 lb)
11.7 kg (26 lb)	13.1 kg (29 lb)
12.3 kg (27 lb)	13.6 kg (30 lb)