8Pelco Manual C483M-E (9/97)

6.0 SPECIFICATIONS
MECHANICAL
Window: 1/4" (.63 cm) thick, impact and abrasion resistant smoked
Lexan™ (1 f-stop attenuation)
Camera Mounting: Adjustable tilt table
Enclosure
Mounting: Four (4) .390" (.99 cm) diameter holes on protected rear surface
Maximum
Camera/Lens
Size Accepts camera/lens combinations
(including BNC connector) up to:
HS3000 3.75" H x 3.25" W x 9.00" L (9.52 cm x 8.25 cm x 22.86 cm)
HS3020 3.75" H x 3.25" W x 18.00" L (9.52 cm x 8.25 cm x 45.72 cm)
Security: Tamper-resistant screws and N.O./N.C. switch contact on
cover
Tamper Switch: Plunger type door switch with “pull to cheat” feature. N.O./N.C.
contacts clearly marked on body of switch.
DM electrical
rating: 10A, 125V. Plunger type with .20" (0.51 cm)
ELECTRICAL
Cable Entry: Two (2) cable knockout holes on flat mounting surface
One (1) cable knockout hole on the end opposite the viewing
window
Knockouts are Ø.875-inch (2.22 cm) and will accept 1/2-inch
(1.27 cm) conduit
Tamper Switch: 1/4" (.63 cm) quick connect. N.O./N.C. clearly marked on switch
body. 10A, maximum switching current 125V, maximum switch-
ing voltage.
GENERAL
Construction: Seam welded 14 GA (.074") steel
Finish: Polyester powder coat
Security: Two (2) tamper-resistant screws
Weight:
HS3000: 8 lbs (3.6 kg)
HS3020: 16 lbs (7.2 kg)
Dimensions: See Figure 2

(Design and product specifications subject to change without notice.)

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.