Pelco Manual C1995M-A (10/01) 43
ALARM LOG
ALARM LOG
NO.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
CAMERA
16
03
11
14
11
11
11
09
11
14
07
11
16
14
03
08
11
14
TIME
23:59:59
12:02:10
12:04:14
12:05:37
12:09:29
12:13:19
12:17:25
13:14:26
13:49:49
13:54:14
15:44:33
16:19:56
16:26:35
17:04:22
19:10:17
20:32:58
20:45:40
21:19:32
DATE
12-29-99
10-30-99
12-30-99
12-30-99
12-30-99
12-30-99
12-30-99
12-30-99
12-31-99
12-31-99
12-31-99
12-31-99
12-31-99
12-31-99
12-31-99
12-31-99
12-31-99
12-31-99
TO PAGE
Figure 27. Alarm Log
The alarm log lists the last 72 alarms. Alarm number 1 is the most recent. If there are more
than 18 alarms in the log, up and down arrows and the words “PRESS UP OR DOWN
ARROW TO PAGE” appear at the bottom of the screen.
1. To access the log, double-press the VIEW button on the multiplexer’s front panel (you
cannot use the keyboard to access this log). The log appears.
2. If there are more than 18 alarms, use the up and down arrows to move forward and
backward by sets of 18 (72 total).
3. If you want to clear the log, press VIEW twice while looking at the log.
4. To exit without clearing, press any key.
TROUBLESHOOTING
If you have difficulty operating your system, run through the following checklist to see if you
can solve the problem.
1. Are the keyboard switches set properly?
2. Is the equipment wired properly?
3. Are the menu options in the multiplexers and server set properly?
4. Is the LIVE/VCR LED on for live video and off for tape playback?
5. The main monitor displays individual or multiple camera images. The spot monitor
displays full-screen views only.
6. SPOT MONITOR must be selected to operate presets, patterns, and auxiliaries.
7. Tape playback can be done only on the main monitor and only while in VCR mode.
8. Moveable cameras must be Coaxitron compatible and the proper Coaxitron format
selected in the multiplexer’s Camera menu. If the proper format is not selected, the
camera will either not move or have sluggish control.