Pelco PMCL-V200 instruction

C2228M-C (7/07)

PMCL-V200

Monitor Mount Adapter

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Installation should be done only by qualiﬁed personnel and conform to all local codes.

6.Use only installation methods and materials capable of supporting four times the maximum speciﬁed load.

7.Only use replacement parts recommended by Pelco.

8.This unit is designed for indoor use only, and it must not be installed where exposed to rain or moisture.

Description

The PMCL-V200 monitor mount adapter allows an LCD monitor mount to be used with larger LCD monitors, such as Pelco’s 500 Series monitors.

This adapter accommodates monitors with 200 x 200 mm and 200 x 100 mm hole patterns. The PMCL-V200 monitor mount adapter can be used with the following Pelco mounts:

PMCL-WM	Wall mount
PMCL-WMT	Tilt-swivel wall mount
PMCL-WM1A	Single-arm wall mount
PMCL-WM2A	Double-arm wall mount
PMCL-CM	Ceiling mount
PMCL-CMP	Ceiling mount and telescoping pole

Installation

The following parts are supplied:

Qty Description

1 Adapter plate

410-32 x 3/4-inch ﬂat head Phillips screws, stainless steel

4#10 split lock washers

410-32 hex nuts, stainless steel

4M6 x 12 mm pan head Phillips screws, stainless steel

4#8 split lock washers

4M4 x 10 mm pan head Phillips screws, stainless steel

4Flat washers