14 Pelco Manual C580M Rev D (9/97)
7.0 SPECIFICATIONS
ELECTRICAL
PT506-24DT
Input Voltage: 120 VAC, 50/60 Hz (230 VAC optional)
Output Voltage: 24 VAC, 60 Hz pan/tilt supply
0 to ±9 VDC lens supply
Power
Requirement: 1.65 amps (190 vA)
Cable
Requirements: 11 conductors (Pan/tilt 5 + ground; Lens 4 + ground)
Fuse Protection: 2 AG type 1ASB
Power Cord: 3-wire grounded #18 Awg
Connectors: AMP CPC type (mate supplied)
Replacement
Lamps: Station Select Switch replacement lamp #LAP72524
PT506-24A
Power
Requirements: 1.04 amps (120 vA)
Protection: 3 AG, 2 amps
Power Cord: 3-wire grounded
CONTROLS
PT506-24DT
Pan/Tilt Selection: 6 latching, illuminated push buttons
Pan/Tilt: 8 position joystick (UP, DOWN, LEFT, RIGHT, and simulta-
neous combinations for pan/tilt when joystick is moved diago-
nally.)
Zoom: Paddle switch, TELE/WIDE
Focus: Paddle switch, NEAR/FAR
Iris: Paddle switch, OPEN/CLOSE
Lens Speed: Potentiometer
On/Off: Rocker switch
Pilot Lamp: Light emitting diode
PT506-24A
On/Off: Rocker switch
Auto/Random: 6 Rocker switches (one for each pan/tilt); 2 operational posi-
tions (Auto/Random and Manual)