PELCO Manual C937M - 1/96 1
INSTALLATION MANUAL
MODEL RMJ9UCA RACK MOUNT KIT
1.0 SCOPE
The information within this manual covers the instal-
lation of the RMJ9UCA Rack Mount Kit.
Installation should be in accordance with all appli-
cable local and national electric codes, utilizing
approved materials only.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.
2.0 DESCRIPTION
The RMJ9UCA Rack Mount Kit is designed to pro-
vide rack mounting for single or dual PELCO PMC09A
and PMC09A-X 9" monitors.
This versatile rack will fit any standard 19-inch wide
console or rack configuration.
C937M
Figure 1. RMJ9UCA Dimension Drawing
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES
®
3.0 SPECIFICATIONS
Dimensions: See Figure 1
Construction: 16-gauge steel
Weight: 5 lbs 4 oz.
4.0 INSTALLATION
1. Remove rubber feet on front bottom of monitor.
2. Install monitor through rear of rack, placing rear
rubber feet on monitor into locating holes in floor
or rack.
3. Install rack and monitor as an assembly into
console and make any required electrical con-
nections.
4. Hold into place, aligning mounting holes of the
RMJ9UCA with mounting holes in console, and
insert and tighten required fasteners (not sup-
plied). If only a single monitor is used, install
cover plate up against window frame and then
insert fasteners and tighten.