C1664M-A (11/05)TW3001P Passive Single-Channel Video Transceiver ®
The TW3001P video transceiver is a passive (no power required) single-channel balun that sends full motion video
(color/black-white) and Coaxitron
®
PTZ control signals over a single unshielded twisted pair (UTP) cable.
Two TW3001Ps or one TW3001P with a transceiver or active receiver are required for transmission over a single
UTP cable. The TW3001P is compatible with all Pelco twisted pair equipped cameras, enclosures, and domes.
NOTE:
CAT 5e cable is recommended for optimum video performance.
Figure 1.
TW3001P Basic Applications
Cable Type Distance (with Coaxitron) Distance (video only)
CAT 3 300 ft 400 ft
CAT 5 500 ft 650 ft
CAT 5e 750 ft 1,000 ft
CAT 6 750 ft 1,000 ft
Wire Gauge (maximum allowable)
Single Wire (solid) 16 AWG (1.5 mm
2
)
Stranded Wire (flexible) 18 AWG (1.0 mm
2
)
TW3001P
MONITOR
TW3001P
MONITOR
SPECTRA
TW3001P
UTP
UTP
MONITOR
UTP
COAXITRON
VIDEO
VIDEO
VIDEO
CAMCLOSURE
+
-
+
-
10 PINS (5-/6+)
8 PINS (4-/5+)
PIN 5+
PIN 4-
FIXED CAMERA
DIRECT
CONNECTION
DIRECT
CONNECTION
DIRECT
CONNECTION
NOTE: A TW3001P CAN BE CONNECTED DIRECTLY INTO CAMERAS THAT DO NOT HAVE AN RJ-45 CONNECTOR.
UTP CAMERAS HAVE A10-PIN RJ-45 CONNECTOR. STANDARD RJ-45 CONNECTORS HAVE 8 PINS.
BLUE WIRE =
GRAY WIRE =
MATRIX
VC-UTP BOARD