A D D E N D U M
Addendum No.: C1525M-B-ADDEN
Date: March 5, 2003
Manual Affected: VMX200 Video Management System –
Manual Update: The following instructions replace the steps listed on page 11 of the Installation/Operation manual for installing the VMX200 in a
Refer to Figure 1 for the following instructions.
1.Attach the rack ears to the front sides of the VMX200 with the
2.Attach the brackets to the sides of the equipment with the
3.Fasten the front and rear support rails together with the
4.Attach the support rails to the equipment rack with the
5.Slide the brackets on the equipment onto the support rails.
6.Fasten the rack ears to the equipment rack with the
Figure 1. Installation of Support Rails
Pelco World Headquarters • 3500 Pelco Way, Clovis, California
USA & Canada: Tel:
® International: Tel:
