C561M-E (8/05) 9
SPECIFICATIONS

ELECTRICAL

Input Voltage: Selectable 100, 120, 240 VAC, 50/60 Hz via the Primary Line Input connector
strip
Output
Voltage/Power: Selectable 24 VAC (Tap A), 26 VAC (Tap B), or 28 VAC (Tap C) at 100 VA via
the Secondary Output Tap’s connector strip
Fusing: One fuse. Select from one of the following supplied fuses:
Three 1.6 A fast-acting fuses (120 VAC)
Three 500 mA fast-acting fuses (240 VAC)
Spare Fuse
Holder: Two spare fuse holders (attached to transformer cover)

MECHANICAL

Construction: Aluminum
Finish: Gray polyester powder coat
Cable Entry: Two hole plugs will accommodate 3/4-inch (1.91 cm) conduit fittings (not
provided) that meet NEMA Type 4X standards.
Mount Method: Four 0.375-inch (0.95 cm) holes on mounting plate
Latch: One stainless steel link-lock latch secured with screw; latch also can be
secured with padlock (not supplied)

GENERAL

Environment: Indoor/outdoor
Operating Range: -50°F to 122°F (-45.56°C to 50°C)
Weight: 6.5 lb (2.95 kg)
Dimensions: See Figure 5

(Design and product specifications subject to change without notice.)

This equipment contains electrical or electronic components that must be recycled properly to
comply with Directive 2002/96/EC of the European Union regarding the disposal of waste
electrical and electronic equipment (WEEE). Contact your local dealer for procedures for
recycling this equipment.