Manuals / Pella / Household Appliance / Window

Pella 816G0101 warranty Interior Seal, C K E T R E P L a C E M E

Models: 816G0101

1 12
Download 12 pages 51.58 Kb
Page 6
Image 6

3SEALING AND FASTENING THE WINDOW (CONTINUED)

G.Finish driving all the installation screws through the wood frame jamb, ensuring the head of the screws is flush with the surface of the wood frame.

DO NOT drive screws below flush with the surface of the frame.

D

3G

Improper screw depth, screw head driven below the surface of frame.

D

3G

Proper screw depth, screw head flush with surface of frame.

P O C K E T R E P L A C E M E

H. Check window operation (vent units only). Unlock the window by lifting the lock handle up. Open the window by rotating the crank handle. Remove the shipping spacers. Open and close the window a few times to check for proper operation. Close and lock the window.

Note: If there are any problems with the operation of the window, recheck the shim locations and adjust for plumb and square.

4INTERIOR SEAL

Caution: Ensure use of low pressure polyurethane window and door insulating foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the window frame to bow and hinder operation.

N T

A.Apply insulation foam. From the interior, insert the nozzle of the applicator approximately 1" deep into the space between the window and the rough opening and apply a 1" deep bead of foam. This will allow room for expansion of the foam and will minimize squeeze out. Allow the foam to cure completely (usually 8 to 24 hours) before proceeding to the next step.

Note: It may be necessary to squeeze the end of the tube with pliers to be able to insert into the space between the new and existing window frame. DO NOT completely fill the space from the back of the blind stops to the interior face of the opening.

4A

B.Check window operation by opening and closing the window.

Note: If the window does not operate correctly, check to make sure it is still plumb, level, square and that the sides are not bowed. If adjustments are required, remove the foam with a serrated knife. Adjust the shims, and reapply the insulating foam sealant.

C.Inspect the foam after it has cured. Fill any voids with foam prior to installing interior trim.

D.Reinstall the existing interior sash stops or new trim as desired.

Page 5 Page 7
Page 6
Image 6
Pella 816G0101 warranty Interior Seal, C K E T R E P L a C E M E
Page 5 Page 7

816G0101 specifications

The Pella 816G0101 represents a sophisticated window solution, designed for both style and functionality. Renowned for its energy efficiency and aesthetic appeal, this window is suited for various architectural styles while meeting modern performance standards.

One of the standout features of the 816G0101 is its high-performance glass technology. It utilizes advanced insulating glass, which significantly reduces heat transfer, thereby enhancing thermal efficiency. This is particularly crucial in regions with extreme weather, as it helps maintain consistent indoor temperatures year-round. The Low-E (low emissivity) glass coatings minimize UV and infrared light spectrum while maximizing visible light, ensuring that homes remain bright while protecting interior furnishings from fading.

In terms of durability, the 816G0101 is built to withstand harsh environmental conditions. The quality materials used in its construction include a fiberglass exterior that resists warping and rotting, ensuring that the window retains its integrity and appearance over time. Additionally, the window's frame features multiple interior colors and finishes, allowing homeowners to customize the look of their windows to match their home’s aesthetic.

Another key characteristic of the Pella 816G0101 is its ease of maintenance. The window is designed with a durable finish that requires minimal upkeep, making it an excellent choice for busy homeowners. Its design also promotes easy cleaning, with tilt-in sashes allowing for simple access to both sides of the glass.

The window also prioritizes security and comfort. Equipped with robust locking systems, the 816G0101 offers peace of mind against potential intruders. Moreover, the window comes with weather seals that combat drafts and moisture infiltration, contributing to a comfortable and quiet indoor environment.

Overall, the Pella 816G0101 combines energy efficiency, durability, low maintenance, and aesthetic flexibility, making it an excellent choice for any homeowner looking to enhance their living space. With its blend of advanced features and technologies, this window stands out as a practical and stylish option in the competitive market of home improvement products.