UNPACKING AND SET-UP
Unpack your heater and remove the wheel assemblies from the package.
1.Make sure the heater is unplugged and in the ”OFF” position.
2.TURN THE HEATER UPSIDE DOWN.
3.Position the two holes assemblies of the two half bases and fix them as shown.
4.Insert each
5.Insert the butterfly nuts and screw them tightly.
6.Turn the heater upright.
IMPORTANT!
Your heater is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your outlet. DO NOT defeat the safety purpose of the polarized plug.
OPERATING INSTRUCTIONS
A
C
D
B
Parts and Name
A | Power switch | B | Air Outlet |
|
|
|
|
C | Thermostat | D | Power Indicator Light |
|
|
|
|
Place the heater on a firm level surface free from obstructions, and at least 3 ft. away from any wall and any other objects such as furniture, curtains, plants or combustible material.
With the Power and Setting Control “A” in the ”OFF” position, plug the heater into a grounded 120V outlet.
Turn the heater ”ON” by turning the Power and Setting Control “A” clockwise to your desired power setting (LOW, HIGH , LOW&OSC or HIGH&OSC ). The Power Indicator Light “D” will illuminate. The power settings operate as follows:
LOW: The Fan and heating elements operate at 900 Watts.
HIGH: The Fan and heating elements operate at 1500 Watts.
LOW&OSC: The Fan and heating elements operate at 900 Watts.
HIGH&OSC: The Fan and heating elements operate at 1500 Watts.
Turn the Thermostat Control “C” to your desired setting from “MIN” to “MAX”. Turning the thermostat clockwise will increase the “set” temperature; turning the thermostat counterclockwise will decrease the “set” temperature.
CAUTION: This heater includes a Thermal
