CSP Series™
Commercial Self-Priming Pump
For commercial and public swimming pools and spas, aquatic facilities, water parks and fountain applications where high performance and
Rugged,
1,100 cubic inch capacity hair and lint strainer. Motors are standard JM type, NEMA “C” flange design with a stainless steel shaft sleeve. These cast iron pumps are available in 71⁄2, 10, 15 and 20 HP, and may be purchased with or without
Standard Features
•Cast iron construction, enclosed bronze impeller and bronze wear rings for long lasting reliability.
•Exceptional self priming design with hair and lint strainer installed – allows pumps to be installed above or below water level.
•Oversized hair and lint strainer* with
•Available in a wide range of performance levels from 71⁄2 to 20 HP to handle your varied pumping needs.
•Nationally recognized NEMA® motors offer high performance under continuous operation.
•Back
•Dimensionally compatible to most installations for easier initial
•Integral design base is slotted for ease of mounting.
*To insure priming and proper pump operation, install only with