Pentax 2.1 Installing the Software, When Using Windows

Installing the Software 7

Here is the procedure for installing PENTAX PHOTO Browser 2.1 and PENTAX PHOTO Laboratory 2.1.

PENTAX PHOTO Browser 2.1 and PENTAX PHOTO Laboratory 2.1 can be installed on top of earlier versions of this software supplied with w and J.

When multiple accounts have been setup in Windows 2000/XP or Mac OS X, log on with an account that has administrative rights before installing the software.

When Using Windows

1 Turn your computer on.

Close any other software that is open.

2 Place the provided CD-ROM (S-SW34) into the CD-ROM drive on your computer.

The PENTAX Software Installer screen appears.

•If the PENTAX Software Installer screen does not appear

Display the PENTAX Software Installer screen following the steps below.

1)Double-click [My Computer] from the start menu.

2)Double-click the [CD-ROM drive (S-SW34)] icon.

3)Double-click [Setup.exe].

3 You can choose the languages from the displayed screen.

The software selection screen appears.