Turn off the camera, then open the battery/card cover.
1
2 Insert a card until it clicks into place. To remove a card, press and release it.
Chapter 6. Using an EYE-FI Card (optional accessory)
This chapter pertains only if you’re using an EYE-FI Card.
An EYE-FI Card stores pictures just like an SD/SDHC Card does. It also has a built-inWi-Fi antenna that uses your Wi-Fi network to transfer pictures from your camera to your computer or mobile device. Choose an EYE-FI X2 Card or higher.
To set up and use the EYE-FI Card and EYE-FI Center Software, follow the EYE-FI documentation that accompanied the card.
If using an EYE-FI Card in this camera, it’s critical that you disable (do not turn on) Endless Memory Mode in EYE-FI Center Software.

Accessory

When you turn on the camera, it checks to see if a card is inserted. If pictures/videos are detected in internal memory, the camera prompts you to move them to the card. New pictures/videos are stored on the card.

15