114

5 FunctionReference

4

 

 

 

 

 

 

 

 

Use the four-way controller (3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to select K(Manual).

 

 

White Balance

 

 

 

 

 

 

 

 

 

 

Manual

 

 

 

 

 

 

 

 

Adjust

OK OK

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the four-way controller

 

 

 

 

 

 

 

Manual

 

 

 

 

(5).

 

White Balance

 

 

 

 

 

The message screen appears.

 

 

 

 

 

 

 

 

 

 

Point camera at subject

 

 

 

 

 

Press the shutter

 

 

 

 

 

 

 

 

release button

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Fully display a white or gray sheet of paper in the viewfinder under the light to adjust white balance.

7 Press the shutter release button fully.

Slide the focus mode lever to \when the shutter cannot be released. [OK] appears on the LCD monitor when setting is completed.

[NG] appears when setting is not completed successfully.

8 Press the 4button.

• No image is recorded when the shutter release button is pressed to adjust the white balance.

•Press the {button when adjustment is unsuccessful to set again.

•You can set the range to measure white balance when setting manually. White balance is measured using the entire screen using multi-segment metering (p.131) if [Entire screen] is selected for [Man. WB Measurement] in [ACustom Setting] menu (p.101). White Balance is only adjusted in the spot metering area (p.132) if [Spot metering area] is selected.

•If picture is extremely overexposed or underexposed, white balance may not be adjusted. In this case, adjust appropriate exposure and adjust the white balance.